A GROSS DOMESTIC PRODUCT.®
Spiked Cuff Bracelet in Sterling Silver
Spiked Cuff Bracelet in Sterling Silver
Precio habitual
$595.00 USD
Precio habitual
Precio unitario
por
Precio de oferta $595.00 USD
Los gastos de envío se calculan en la pantalla de pago.
No se pudo cargar la disponibilidad de retiro
Two bands meeting at a single eruption.
The Spiked Cuff is built from two parallel polished bands that travel along the inside of the wrist, joined at the front by a Spiked module welded between them. The bands are flat, narrow, structural — sections of mirror-polished silver alternating with shorter passages of vertical stria where the surface is interrupted by parallel ridges. The module at the front is the same eruption of peaks that crowns the Spiked Ring, here rotated and held between the bands like a small architecture suspended over the wrist bone.
Worn, the bands close gently around the wrist while the module sits visible on the front face, slightly raised. The interior of the cuff stays smooth against skin. The peaks of the module catch light from above; the bands catch light along their length. Two registers of the same material in a single object: the gesture concentrated at the front, the structure carrying it.
The wrist counterpart of the Spiked Ring, the founding piece of the (A) Symmetry collection. The same compositional idea — a single eruption contained within a smooth structural form — translated to the architecture of the cuff.
This is the entry point of (A) Symmetry on the wrist: lighter than the Cuff and Bangle in the No. 9 series, more accessible in price, and operating on the same logic as the founding ring. A piece for a buyer who wants the Spiked vocabulary in a more substantial format than a ring.
THE DATA
Material: Solid Sterling Silver .925
Mass: approximately 21 grams
Dimensions: 65 mm × 52 mm × 23 mm
Inner span: approximately 50 mm — fits wrists 14.5–17.5 cm circumference
Construction: Twin parallel bands + Spiked module welded at front
Surface: Polished bands with vertical-stria sections, polished module
Architecture: Open cuff, gently adjustable
Finish: Mirror polish throughout
Fabrication: 3D printed silver + manual finishing
Sizing: One size, hand-adjustable
Production: Made to order — 21 business days from confirmed payment
Production note: Each Spiked Cuff is produced individually. Because the Spiked module is irregular by design, every piece carries slightly different proportions in the peaks. These are not flaws. They are the reason this piece exists. Allow 21 business days from order confirmation before shipment.
Maintenance: Sterling silver is reactive and develops patina through environmental friction over time. Restore the mirror finish with regular mechanical polishing using a silver cloth. The vertical-stria sections of the bands and the recesses between the spike peaks may darken naturally — many wearers leave these areas as they age and keep only the broader polished surfaces bright. Both approaches are correct.
The Spiked Cuff is built from two parallel polished bands that travel along the inside of the wrist, joined at the front by a Spiked module welded between them. The bands are flat, narrow, structural — sections of mirror-polished silver alternating with shorter passages of vertical stria where the surface is interrupted by parallel ridges. The module at the front is the same eruption of peaks that crowns the Spiked Ring, here rotated and held between the bands like a small architecture suspended over the wrist bone.
Worn, the bands close gently around the wrist while the module sits visible on the front face, slightly raised. The interior of the cuff stays smooth against skin. The peaks of the module catch light from above; the bands catch light along their length. Two registers of the same material in a single object: the gesture concentrated at the front, the structure carrying it.
The wrist counterpart of the Spiked Ring, the founding piece of the (A) Symmetry collection. The same compositional idea — a single eruption contained within a smooth structural form — translated to the architecture of the cuff.
This is the entry point of (A) Symmetry on the wrist: lighter than the Cuff and Bangle in the No. 9 series, more accessible in price, and operating on the same logic as the founding ring. A piece for a buyer who wants the Spiked vocabulary in a more substantial format than a ring.
THE DATA
Material: Solid Sterling Silver .925
Mass: approximately 21 grams
Dimensions: 65 mm × 52 mm × 23 mm
Inner span: approximately 50 mm — fits wrists 14.5–17.5 cm circumference
Construction: Twin parallel bands + Spiked module welded at front
Surface: Polished bands with vertical-stria sections, polished module
Architecture: Open cuff, gently adjustable
Finish: Mirror polish throughout
Fabrication: 3D printed silver + manual finishing
Sizing: One size, hand-adjustable
Production: Made to order — 21 business days from confirmed payment
Production note: Each Spiked Cuff is produced individually. Because the Spiked module is irregular by design, every piece carries slightly different proportions in the peaks. These are not flaws. They are the reason this piece exists. Allow 21 business days from order confirmation before shipment.
Maintenance: Sterling silver is reactive and develops patina through environmental friction over time. Restore the mirror finish with regular mechanical polishing using a silver cloth. The vertical-stria sections of the bands and the recesses between the spike peaks may darken naturally — many wearers leave these areas as they age and keep only the broader polished surfaces bright. Both approaches are correct.
