A GROSS DOMESTIC PRODUCT.®
Junction Bangle in Sterling Silver
Junction Bangle in Sterling Silver
Precio habitual
$1,650.00 USD
Precio habitual
Precio unitario
por
Precio de oferta $1,650.00 USD
Los gastos de envío se calculan en la pantalla de pago.
No se pudo cargar la disponibilidad de retiro
Three bands. Two rivets. One axis.
The Junction Bangle is built from three parallel planes of solid Sterling Silver .925 joined at a single structural point. The rivets are not decorative — they are the pivot where the geometry resolves itself. Everything else is consequence: the flat sectional profile, the recessed matte channels between bands, the high-gloss outer faces that hold light across the full curvature of the piece.
Seen from above, the bangle reduces to three concentric circles interrupted by the node. Seen in profile, it becomes a single thickened edge. The piece sits against the wrist with deliberate mass — it occupies the arm rather than resting on it.
Proportions scale across sizes. A smaller wrist receives a narrower band; a larger wrist, a wider one. The ratio between diameter, width, and rivet placement holds constant across XS through XL, so the object reads the same on any body that wears it.
Wear it against a dark silk cuff at a bar, or alone under a watch on a wooden desk. The Junction operates equally in both registers — documentary and editorial, rigorous and quiet.
THE DATA
Material: Solid Sterling Silver .925
Construction: Three-band rigid structure, riveted structural node
Section: Flat rectangular profile
Finish: Mirror polish on outer faces, matte recessed channels
Sizing: XS / S / M / L / XL — proportional across all dimensions
Fabrication: 3D printed silver + manual architectural polish
Production: Made to order — 21 business days from confirmed payment
Production note: Each Junction Bangle is produced individually — printed, cleaned, and polished by hand. Minor variations in polish and tonal density are part of the object's evidence, not flaws in it. Allow 21 business days from order confirmation for your piece to be completed before shipment.
Maintenance: Sterling silver is reactive and will develop patina through environmental friction over time. Restore the mirror finish with regular mechanical polishing using a silver cloth or professional ultrasonic cleaning.
The Junction Bangle is built from three parallel planes of solid Sterling Silver .925 joined at a single structural point. The rivets are not decorative — they are the pivot where the geometry resolves itself. Everything else is consequence: the flat sectional profile, the recessed matte channels between bands, the high-gloss outer faces that hold light across the full curvature of the piece.
Seen from above, the bangle reduces to three concentric circles interrupted by the node. Seen in profile, it becomes a single thickened edge. The piece sits against the wrist with deliberate mass — it occupies the arm rather than resting on it.
Proportions scale across sizes. A smaller wrist receives a narrower band; a larger wrist, a wider one. The ratio between diameter, width, and rivet placement holds constant across XS through XL, so the object reads the same on any body that wears it.
Wear it against a dark silk cuff at a bar, or alone under a watch on a wooden desk. The Junction operates equally in both registers — documentary and editorial, rigorous and quiet.
THE DATA
Material: Solid Sterling Silver .925
Construction: Three-band rigid structure, riveted structural node
Section: Flat rectangular profile
Finish: Mirror polish on outer faces, matte recessed channels
Sizing: XS / S / M / L / XL — proportional across all dimensions
Fabrication: 3D printed silver + manual architectural polish
Production: Made to order — 21 business days from confirmed payment
Production note: Each Junction Bangle is produced individually — printed, cleaned, and polished by hand. Minor variations in polish and tonal density are part of the object's evidence, not flaws in it. Allow 21 business days from order confirmation for your piece to be completed before shipment.
Maintenance: Sterling silver is reactive and will develop patina through environmental friction over time. Restore the mirror finish with regular mechanical polishing using a silver cloth or professional ultrasonic cleaning.
